Installing and Removing Protective Film Correctly

The correct installation and removal of the protective film is very important to ensure the performance of the protective film and the effective protection of items. Here are some common precautions for installing and removing protective film:

When installing protective film:

1. Preparation: Clean and prepare the surface of the item before installation. Make sure the surface is dry, flat, and free of dust, grease, or other impurities.
2. Wet paste method: For some protective films, the wet paste method can be taken to reduce the generation of bubbles and folds. First, spray the protective film with an appropriate amount of cleaning solution, and then paste the film on the surface of the product, and gently wipe it with a scraper to ensure that the film is fully fitted to the surface of the product.
3. Flat and fit: Ensure the flat level of the surface of the protective film to avoid bubbles or folds. Using a tool such as a scraper or rigid plastic card, scrape away excess air and water from the center to the edges.

When removing  protective film:

1. Walk carefully: When removing the protective film, be careful to avoid damaging the surface of the item. Use an appropriate tool, such as a scraper or plastic sheet, to slowly remove the protective film from the surface of the product.
2. Pay attention to the direction: according to the characteristics of the protective film, pay attention to the correct removal direction. Some protective films may have a sticky side, peel it off slowly to avoid straining or scratching the surface of the item.
3. Cleaning residue: After removing the protective film, sometimes there will be some glue or residue. Using an appropriate cleaner or liquid, wipe the surface of the item to remove glue or residue and ensure that the surface is smooth.

It is important to emphasize the correct installation and removal of the protective film to avoid potential damage and ensure the effectiveness and life of the protective film. It is also important to follow the manufacturer’s instructions or instructions for use, as different types of protective films may require specific installation and removal methods.

If you are interested in our products, please feel free to contact us!