To prevent fire during the coating process of protective films, the following measures can be taken

To prevent fire during the coating process of protective films, the following measures can be taken

1. Control flammable materials: Minimize the use of flammable materials such as solvents and paints in the coating workshop to ensure their storage and use comply with safety regulations.
2. Good ventilation: Maintain good ventilation and exhaust in the coating workshop to reduce the concentration of flammable gases and dust and prevent them from reaching the explosion limit.
3. Electrical equipment explosion-proof: The electrical equipment in the coating workshop should be explosion-proof to prevent fire caused by sparks.
4. Fire prevention partition: Divide the coating workshop into different areas and install fireproof walls, fire doors, and other partitions to prevent the spread of fire.
5. Fire protection facilities: The coating workshop should be equipped with sufficient fire extinguishers, firefighting equipment, etc., and regularly checked and maintained to ensure they are in good condition.
6. Personnel training: Provide fire safety training for operators in the coating workshop to improve their awareness and ability to prevent and respond to fires.
7. Monitoring and surveillance: Install fire alarm systems and monitoring equipment to monitor temperature, smoke, and other abnormal conditions in the workshop, detect fires promptly, and take appropriate measures.
8. Waste disposal: Properly dispose of waste generated in the coating workshop to avoid their accumulation and spontaneous combustion, which may cause fires.

Implementing the above measures, can effectively reduce the fire risk during the coating process of protective films and ensure production safety.