Why does the protective film turn adhesive? 

The phenomenon of a protective film turning adhesive is usually caused by various factors or improper application. Here are some main reasons that can lead to the protective film turning adhesive:

  1. High Temperature: High temperatures can cause the adhesive on the protective film to become sticky or soften, leading to the film becoming adhesive. This is particularly common in hot weather or high-temperature environments.
  2. Incorrect Adhesive Selection: Using adhesive that is not suitable for a specific application or environmental conditions can result in the film turning adhesive. Some adhesives may be incompatible with certain surfaces or may become unstable at specific temperatures.
  3. Insufficient Adhesion: If the protective film is not adequately adhered to the surface, it may peel off and become adhesive under external forces such as wind or water pressure.
  4. Dust or Grease Contamination: Dust, grease, dirt, or other contaminants on the surface can affect the adhesion of the protective film to the surface, leading to adhesive issues.
  5. Low-Quality or Unsuitable Protective Film: Using low-quality protective film or protective film not suitable for a specific application can lead to adhesive problems. Different types of protective films are suitable for different applications and conditions.
  6. Application Issues: Incorrect application techniques, improper installation, or choosing the wrong tools can lead to the formation of bubbles, wrinkles, or uneven adhesion, ultimately causing the film to become adhesive.
  7. Prolonged Exposure: If the protective film remains on the surface for too long, the adhesive may turn adhesive when detaching from the surface, especially in high-temperature conditions.
  8. Strong External Forces: External forces such as wind, water pressure, physical impact, or pulling can also cause the protective film to become adhesive.

pressure sensitive acrylate adhesive

To avoid adhesive issues with protective film, consider the following:

  • Choose the Right Protective Film: Select a high-quality protective film that is suitable for the specific application and environmental conditions, ensuring compatibility between the adhesive and the surface.
  • Prepare the Surface: Before applying the protective film, make sure the surface is clean, free of grease, and dust-free to ensure proper adhesion.
  •  Proper Installation: Use appropriate tools and application techniques to ensure the protective film adheres evenly, avoiding bubbles, wrinkles, or excessive stretching.
  • Regular Inspection and Replacement: Periodically inspect the condition of the protective film, and if issues or damage are observed, replace it promptly to ensure effective surface protection.
  • Avoid Prolonged Exposure: If the protective film is no longer needed, remove it in a timely manner to avoid prolonged exposure, especially in high-temperature environments.
  • Follow Manufacturer’s Recommendations: Refer to the manufacturer’s guidelines and instructions for the protective film to ensure correct application and maintenance.

By taking appropriate preventive and maintenance measures, you can reduce the risk of the protective film becoming adhesive and ensure effective surface protection.

protective film

How to deal with adhesive issues on protective film?

If the protective film has adhesive issues, you can follow these steps to address the problem:

  1. Identify the Cause: First, try to determine the specific cause of the protective film becoming adhesive. This will help you take the correct remedial measures and prevent the issue from recurring. Consider the possible factors I mentioned earlier, such as temperature, adhesive selection, surface preparation, etc.
  2. Gentle Removal: If the area of adhesive is not large, you can gently use your fingers or a plastic scraper to slowly remove the adhesive part. Avoid using sharp tools or excessive scraping to prevent scratching or damaging the surface.
  3. Heat Treatment: For some types of protective films, gentle heating can help soften the adhesive, making it easier to remove. Use a heat gun or hairdryer, but be cautious not to set the temperature too high to avoid damaging the surface or the protective film.
  4. Use Appropriate Solvents: In some cases, you can use appropriate solvents to soften or dissolve the adhesive. Be sure to choose a solvent that is compatible with both the surface and the protective film, and test it carefully to ensure it won’t damage the surface. Apply the solvent with a soft cloth, gently wiping until the adhesive starts to loosen, and then slowly remove the protective film.
  5. Maintain Suitable Temperature: If temperature is one of the causes of the adhesive issue, make sure the working environment maintains a suitable temperature to minimize further problems.
  6. Avoid Mechanical Damage: When handling the protective film, avoid using sharp tools or applying excessive force to prevent scratching or damaging the surface. Handle with care, especially for sensitive surfaces.
  7. Thorough Cleaning: After removing the protective film, clean the surface thoroughly using a mild cleaning agent and a soft cloth to ensure any residual adhesive or dirt is removed.
  8. Replace the Protective Film if Necessary: If the protective film is damaged or cannot be effectively removed, consider replacing it with a new one to continue providing surface protection.

Please note that addressing adhesive issues with protective film may require some patience and careful handling, especially when the surface is sensitive to mechanical damage or chemicals. If you are unsure how to proceed or if the problem is severe, it is advisable to seek advice from professionals or the manufacturer for further assistance. Following the appropriate remedial methods can reduce the risk of further damage to the surface and restore the effectiveness of the protective film.

If you are interested in our products, feel free to contact us.

/0 Comments

How to Properly Use Protective Film?

Properly using protective film ensures it performs optimally, extends its lifespan, and safeguards the covered surface.

Here are some guidelines on how to correctly use protective film:

  1. Clean the Surface: Before applying the protective film, thoroughly clean the covered surface. Remove dust, grease, dirt, and impurities to ensure the protective film adheres tightly and doesn’t create bubbles or stains on the surface.
  2. Measure and Cut: Before applying the protective film, measure the required dimensions and cut it to fit the covered surface accurately. Using measuring tools and cutting equipment ensures precise sizing and shape.
  3. Use Specialized Tools: For large or complex surfaces, using specially designed tools like squeegees or application knives can help evenly apply the protective film and remove air and bubbles.
  4. Application and De-Airing: When applying the protective film, carefully affix it to the surface while using gentle hand pressure or a squeegee to remove air and bubbles. Always push from the center towards the edges to ensure even application.
  5. Avoid Overstretching: Avoid overstretching or distorting the protective film during application to prevent uneven tension or wrinkles.
  6. Edge Treatment: Ensure the edges of the protective film are securely bonded to the surface to prevent dirt and moisture from infiltrating the edges.
  7. Avoid Using Sharp Objects: Avoid using sharp tools or objects that may scratch or penetrate the protective film, as this can compromise its protective function.
  8. Regular Inspection: Periodically check the condition of the protective film, especially in high-risk areas or adverse environmental conditions. If the protective film is damaged or starts to wrinkle, replace it promptly to maintain optimal protection.
  9. Gentle Cleaning: When cleaning the surface covered by the protective film, avoid abrasive or corrosive cleaning agents to prevent damage to the film. Use mild cleaning agents and a soft cloth for cleaning.
  10. Regular Replacement: Protective film is typically not permanent and may wear or become damaged over time. Depending on usage, regularly replace the protective film to ensure it continues to provide the best protection.

Protective Film

In summary, proper use of protective film involves preparation, careful application, and regular maintenance. Following these guidelines ensures that the protective film effectively guards the covered surface and prolongs its useful life. If you are unsure about how to remove protective film or have concerns, it is advisable to consult with professionals, especially when dealing with sensitive surfaces or those requiring special care.

In low-temperature environments, forcibly removing protective film can be more challenging. This is because low temperatures can make the material of the protective film more brittle, increasing the risk of tearing or damage.

However, whether successful removal is possible depends on several factors, including the following:

  1. Type of Protective Film: Different types of protective film have different characteristics and adhesion properties. Some protective films may become more robust and difficult to remove in low temperatures, while other types may be more sensitive to cold and relatively easier to remove.
  2. Temperature Level: Low temperatures are relative, so the ability to successfully remove the protective film will depend on the actual temperature level. More extreme cold can increase the difficulty of removal.
  3. Tools and Methods Used: Using appropriate tools and methods can increase the success rate of removal. Some tools (such as plastic scrapers) may be more suitable for removing protective film in low temperatures, while others (like metal blades) may risk surface scratching or damage.
  4. Removal Techniques: Some removal techniques, such as gradually heating the protective film, may make it easier to remove. However, care must be taken to avoid overheating or damaging the surface.
  5. Cold Resistance of the Material: Some protective film materials have better cold resistance and maintain flexibility in low temperatures, which aids in removal. Other materials may become brittle and prone to breaking.

Protective Film

When removing protective film in a low-temperature environment, it is advisable to follow these steps:

  1. Check the Temperature: Ensure that the working environment’s temperature is suitable. If possible, gradually raise the temperature in the surrounding area to make the protective film more pliable.
  2. Use Appropriate Tools: Select tools suitable for the type of protective film used and the surface to reduce the risk of damage.
  3. Attempt Gradual Removal: Try to remove the protective film gradually instead of forcefully tearing it off all at once. A gradual approach can reduce the likelihood of tearing.
  4. Handle with Care: Be careful during the removal process to avoid scratching or damaging the surface. Avoid using excessive force.
  5. Refer to Manufacturer’s Recommendations: If available, consult the manufacturer’s recommendations for using and removing the protective film, especially regarding removal in low-temperature conditions.

Please note that if you are unsure or uncomfortable with removing the protective film, it is best to consult with professionals, especially when dealing with highly sensitive surfaces or those requiring special care. In low-temperature environments, removing protective film may require more patience and careful handling to ensure that no damage occurs to the surface.

If you are interested in our products, please feel free to contact us.

/0 Comments

How is protective film recycled?

Environmentally friendly protective film is the current and future trend. With the increasing awareness of environmental protection and the growing importance of sustainability, many industries are seeking more eco-friendly solutions, and the protective film sector is no exception.

Below are some reasons and characteristics of environmentally friendly protective films becoming a trend:

  1. Waste Reduction and Resource Utilization: Traditional protective films typically use disposable plastic materials, which can generate a large amount of waste after use. Environmentally friendly protective films are made from recyclable or biodegradable materials, helping to reduce waste generation and better utilize resources.
  2. Reduced Dependence on Chemicals: Some traditional protective films may contain harmful chemicals, such as fluorinated compounds. Environmentally friendly protective films typically use more eco-friendly materials and manufacturing processes, reducing the reliance on hazardous chemicals, and thus contributing to environmental and human health protection.
  3. Biodegradability: Environmentally friendly protective films are often designed to be biodegradable, meaning they can break down into harmless substances after their useful life, reducing the burden on landfills
  4. Sustainable Production: The production process of environmentally friendly protective films is typically more sustainable, including energy efficiency, water resource management, and waste disposal. This helps to lower environmental impacts.
  5. Compliance with Regulations and Standards: Many countries and regions are strengthening regulations and standards for environmentally friendly products, driving the development and application of environmentally friendly protective films.
  6. Market Demand: Consumers and businesses are increasingly inclined to purchase and use eco-friendly products, making environmentally friendly protective films competitive in the market.
  7. Brand Image: For many companies, using environmentally friendly protective films helps improve their brand image and demonstrates a commitment to sustainable development.

In summary, environmentally friendly protective films not only help reduce environmental impact but also meet market demands and regulatory requirements. Therefore, more manufacturers and industries will focus on researching and adopting environmentally friendly protective films, making it a trend for the future.

protective film

How is protective film recycled? The recycling of protective film typically involves the following steps and methods to reduce waste and better utilize resources:

  1. Material Selection and Design: The first step in recycling is choosing suitable materials and designs. Using recyclable or biodegradable materials or selecting materials that are already widely recycled can increase the recycling potential of protective films. Designs should also consider structures and components that are easy to recycle.
  2. Sorting and Collection: After the end of their useful life, protective films need to be collected for recycling. This often involves sorting out and collecting used protective films. The sorting process separates different types of protective films for proper processing and recycling.
  3. Cleaning and Processing: Recycled protective films may require cleaning and processing to remove dirt, contaminants, labels, and other impurities. This improves the quality of recycled materials.
  4. Shredding and Processing: Cleaned protective films are typically shredded into small pieces and then processed into raw materials that can be used to manufacture new products. This process may involve melting, extrusion, compression molding, and other treatments.
  5. Remanufacturing: Processed materials can be used to remanufacture new protective films or other plastic products. These new products can include packaging materials, construction materials, automotive parts, and more.
  6. Market Sales: Remanufactured products can be reintroduced to the market and used in new applications. This helps reduce the use of new raw materials, lowers production costs, and promotes the economic viability of protective film recycling.
  7. Education and Awareness: Increasing public and corporate awareness of protective film recycling is crucial. Education and awareness campaigns encourage active participation in the recycling and reuse process.
  8. Policies and Regulations: Governments and relevant organizations can implement policies and regulations to encourage and regulate protective film recycling. This can include incentives, tax policies, and standardization.
  9. Technological Innovation: Continuous technological innovation can enhance the efficiency of protective film recycling and reuse. New recycling technologies and material processing methods help reduce costs and improve feasibility.

In conclusion, achieving the recycling and reuse of protective films requires cooperation and effort from all sectors of society, including manufacturers, governments, consumers, and recycling companies. Through these steps and methods, it is possible to reduce the environmental impact of plastic waste and better utilize finite resources.”

If you are interested in our products, please feel free to contact us.

/0 Comments

 Analyze the functions of glass protective film

Glass protective film is a thin film or coating used to protect the surface of glass. Its primary purpose is to shield glass from damage, scratches, dirt, ultraviolet radiation, and other external factors. This protective film is typically transparent or semi-transparent and does not significantly alter the appearance of the glass.

However, it offers various functions and advantages, as follows:

  1. Scratch and Wear Resistance: Glass protective film can reduce scratches and wear on the glass surface, thereby extending the lifespan of the glass.
  2. Dirt Resistance: It minimizes dirt, water stains, and other contaminants from adhering to the glass surface, making cleaning easier.
  3. UV Radiation Protection: Some glass protective films can block ultraviolet radiation, helping to reduce fading and damage to indoor furniture, flooring, and decorations.
  4. Safety: Certain glass protective films can hold glass fragments together in case of glass breakage, reducing the risk of splintering and enhancing safety.
  5. Privacy Protection: Some glass protective films can reduce transparency or increase privacy by obstructing external views.
  6. Temperature Control: Specific types of glass protective films can assist in regulating indoor temperatures, reducing heat entry or loss, and improving energy efficiency.

glass protective film

Glass protective films are commonly applied to various glass surfaces, including windows, glass doors, glass walls, glass furniture, and more. They find wide-ranging applications in residential, commercial, and automotive sectors. Different types of glass protective films possess distinct characteristics and functions, and the choice depends on specific requirements. These protective films are typically easy to install, adhering to the glass surface, and can be replaced or removed as needed.

What type of protective film is needed when cutting glass?

During the glass-cutting process, it is typically necessary to use a specialized type of protective film to ensure that the glass surface remains safeguarded against scratches, damage, and contamination. The following are types of protective films used for cutting glass:

  1. Glass Cutting Protective Film: This type of protective film is specifically designed for safeguarding the glass surface during the glass-cutting process. It is usually a thin film with high transparency to allow glass craftsmen to see the cutting lines. Additionally, it provides the following protective functions:

– Scratch Resistance: It reduces the risk of scratches caused by glass cutters or cutting tools on the glass surface.

– Dirt Repellence: The protective film prevents dirt, oil stains, and water spots from adhering to the glass surface, ensuring clarity of the cutting lines.

– Safety: In case of glass breakage during cutting, the protective film helps prevent glass shards from scattering, enhancing operator safety.

  1. Double-Sided Adhesive Bottom Film: This type of protective film has adhesive on both sides, allowing it to adhere firmly to the glass surface. This helps ensure that the protective film does not slip or move during cutting, while also protecting the glass surface from scratches.
  2. Self-Adhesive Tape: Some glass craftsmen use self-adhesive tape to protect the glass surface during cutting. These tapes can be applied around the cutting lines to prevent scratches and provide protection. However, it is important to ensure that the selected tape is suitable for glass to avoid leaving adhesive residue or damaging the surface.

glass protective film

When choosing a glass-cutting protective film, factors to consider include:

  • Glass Type: Different types of glass (e.g., regular glass, tempered glass, laminated glass) may require different types of protective films to accommodate their surface characteristics and strength.
  • Cutting Tools: Depending on the cutting tools used (such as glass cutters or glass cutting machines) and the cutting methods, the appropriate protective film should be chosen.
  • Cutting Environment: Consider the humidity, temperature, and other factors of the cutting environment to determine the required protective film type and performance.
  • Operator Safety: Ensure that the selected protective film provides sufficient safety to reduce the risk of accidental injuries.
  • Removal and Cleanup: Select protective films that are easy to remove and clean to ensure that no residue is left on the glass surface after cutting.

In summary, choosing the appropriate glass-cutting protective film is crucial for safeguarding the glass surface and ensuring a smooth cutting process. The selection should be based on specific cutting requirements and processes.

What type of protective film is needed for glass during transportation?

During the transportation of glass, it is typically necessary to use a specific type of protective film to ensure that the glass remains undamaged and free from scratches, fractures, or contamination. The following are common types of protective films used during glass transportation:

  1. Transparent Plastic Sheeting: This type of protective film is usually a transparent plastic sheet that can cover the entire surface of the glass. It provides a protective layer to prevent scratches, dirt, and minor abrasions. Transparent sheeting allows for inspection of the glass’s condition while shielding it from external elements.
  2. Foam Cushion Layer Protective Film: This type of protective film comes with an integrated foam cushion layer designed to provide additional impact-absorbing protection. It helps prevent glass from shattering or getting damaged during transportation due to collisions or impacts.
  3. Double-Sided Adhesive Protective Film: This protective film has adhesive on the bottom side, allowing it to adhere to the glass surface and prevent the film from sliding or moving during transportation. This ensures that the protective film stays firmly attached to the glass, providing long-lasting protection.
  4. Paper-Backed Sheeting: This type of protective film has a paper backing on the bottom, similar to tape. It can be rolled out onto the glass, and the paper backing helps keep the film in place while making it easier to tear off when needed. This type of film is typically suitable for protecting large glass sheets.

glass protective film

When selecting the appropriate protective film for glass transportation, consider the following factors:

  • Glass Type: Different types of glass (e.g., regular glass, tempered glass, laminated glass) may require different types of protective films to accommodate their characteristics and thickness.
  • Mode of Transportation: Consider the mode of glass transportation (e.g., by truck, container, handling equipment) and the potential vibrations and impacts that the glass may encounter during transit.
  • Glass Size: The size and shape of the glass will impact the type and quantity of protective film required.
  • Safety: Ensure that the selected protective film prevents the glass from sliding, reducing the risk during transportation.
  • Ease of Installation and Removal: Choose protective films that are easy to install and remove to enhance efficiency and reduce the risk of damage.

When transporting glass, ensure the correct installation and securing of the protective film to guarantee adequate protection for the glass. Regularly inspect the status of the protective film, especially during longer transportation processes, to ensure its effectiveness.

If you are interested in our products, please feel free to contact us.

/0 Comments

Analyze the role of floor protection film

Floor protection film is a material used to protect the surface of the floor, usually a thin film or coating that can be applied to the floor to prevent damage, contamination, and wear. This protective film is typically used after the floor is installed or on special occasions such as construction, renovation, moving, etc., to temporarily protect the floor from factors like scratches, dirt, liquid penetration, and more.

The primary functions of floor protection film include:

  1. Scratch and wear prevention: Floor protection film can reduce scratches and wear caused by furniture, shoes, and other items, extending the lifespan of the floor.
  2. Waterproof and dirt-resistant: It can prevent liquids from seeping beneath the floor, preventing discoloration or damage. Additionally, it can block dust, dirt, and other contaminants from entering the tiny pores of the floor.
  3. Easy cleaning: Floor protection film is typically easy to clean, allowing for quick wiping or scrubbing and reducing the maintenance workload.
  4. Safety: Some floor protection films have anti-slip properties, improving the safety of the floor, especially in wet environments.
  5. Easy removal: Floor protection film is usually removable, making it easy to peel off when needed without leaving residue or damaging the floor surface.

floor protection film

Floor protection film can be used on various types of flooring, including hardwood, tile, laminate, carpet, and more. They are highly useful in construction sites, home renovations, exhibitions, moving, and other situations where floor protection is required. Different types of floor protection films have different characteristics, and you can choose the appropriate type based on your specific needs.”

For spray painting, what type of floor protection film is needed? When protecting the floor during spray painting, it is typically necessary to choose a specific type of floor protection film to prevent damage from paint pigments and solvents.

For spray painting jobs, the following types of floor protection films are recommended:

  1. Transparent plastic film: This type of film is usually made from polyethylene or polypropylene and is transparent. It can completely cover the floor surface and provides excellent protection against liquids and paint while allowing you to see the floor’s condition. These films are typically easy to apply and remove without leaving residue.
  2. Adhesive-backed film: These films have a layer of adhesive on the bottom, allowing them to adhere to the floor and prevent shifting or sliding during the painting process. This type of protection film offers a more secure protection as it is less likely to be accidentally removed or moved. However, care should be taken when removing it to avoid leaving adhesive residue.
  3. Paper-backed film: These floor protection films have a paper backing similar to tape. You can roll them out onto the floor, and the paper backing helps keep the film in place and makes it easier to remove when needed. This type of film is often suitable for larger surfaces, such as at exhibitions or construction sites.

When choosing a floor protection film for spray painting, consider the following factors:

  •  Floor-type: Ensure that the selected film is suitable for your type of flooring to prevent damage or staining.
  • Type of paint: Different types of paint (e.g., water-based, oil-based, clear coats) may require different protection films due to variations in chemical properties and solvents.
  • Expected duration: Consider how long you need to protect the floor to determine whether you need temporary or long-term protection.
  • Safety: Ensure that the chosen film does not make the floor slippery, especially in wet conditions.

floor protection film

When using floor protection film, follow the manufacturer’s guidelines to ensure the best results and prevent any potential damage. Additionally, regularly check the film’s condition to maintain the integrity of the floor.”

For transportation, what type of floor protection film is needed? When transporting flooring materials, it is generally necessary to use a specific type of floor protection film to ensure that the flooring remains undamaged and uncontaminated during transit.

The following are common types of protective films used during transportation:

  1. Surface protection film: This type of floor protection film is typically a transparent thin film that can cover the surface of the floor to protect it from scratches, dirt, and minor abrasions. It can be used on various types of flooring, such as hardwood, tile, and laminate. Transparent film allows you to inspect the floor’s condition while providing protection.
  2. Foam-backed floor protection film: This film has a built-in foam cushion layer that provides additional impact absorption protection, preventing the floor from being damaged during transport due to bumps or impacts. Foam-backed floor protection film is particularly suitable for fragile or easily damaged flooring materials.
  3. Adhesive-backed floor protection film: This type of film has a layer of adhesive on the bottom, allowing it to adhere to the floor and prevent the film from sliding or coming off during transportation. This design ensures that the protective film stays securely in place and doesn’t shift during transit.
  4. Paper-backed floor protection film: These films have a paper backing similar to tape, making them easy to roll out onto the floor. The paper backing helps maintain the film’s position and facilitates easy removal when necessary. This type of film is often used for larger surfaces, such as at exhibitions or construction sites.

When selecting a floor protection film for transportation, consider the following factors:

  • Floor-type: Ensure that the chosen film is suitable for the type of flooring you are transporting to prevent damage.
  • Transportation conditions: Consider the distance, mode, and conditions of transportation to determine the required level and type of protection.
  • Budget: Different types of protective films have varying prices, so budget constraints should be taken into account.
  • Ease of use: Choose a protective film that is easy to install and remove to improve efficiency during transportation.

When transporting flooring materials, make sure to properly install and secure the protective film to ensure adequate protection for the floor during transit. Additionally, regularly check the condition of the floor protection film, especially for longer transportation periods, to ensure its effectiveness.

If you are interested in our products, please feel free to contact us.

/0 Comments

Bonding for a Sustainable Future: Our Eco-Friendly Adhesive Solutions

In an era where environmental consciousness is paramount, industries worldwide are actively seeking sustainable alternatives in their production processes. At the forefront of this shift towards eco-friendliness are adhesive solutions. As a B2B adhesive manufacturer, we proudly offer adhesive products that not only excel in performance but also champion sustainability, reducing our environmental footprint and contributing to a greener world.

acrylic pressure sensitive adhesive

Embracing Eco-Friendly Adhesives

The move towards eco-friendly adhesive products is a testament to our commitment to environmental stewardship. We understand that industries are increasingly focused on minimizing their impact on the planet, and our eco-friendly adhesives are designed to align with these values.

Our adhesive formulations prioritize the use of renewable and biodegradable materials, reducing the reliance on non-renewable resources. This not only conserves valuable resources but also decreases the carbon footprint associated with adhesive production. Additionally, our adhesives are free from harmful volatile organic compounds (VOCs) and other hazardous substances, ensuring a safer and healthier work environment for all.

Adhesives

Sustainable Applications Across Industries

Our eco-friendly adhesive solutions find application across a diverse range of industries, contributing to sustainable practices and reducing environmental impact:

Packaging: In the realm of packaging, our eco-friendly adhesives play a vital role in creating sustainable and recyclable packaging materials. They allow for secure bonding while enabling easy separation and recycling of packaging components, reducing waste and promoting a circular economy.

Renewable Energy: The renewable energy sector relies on durable adhesive solutions to manufacture solar panels, wind turbines, and battery systems. Our adhesives ensure the longevity of these technologies, making clean energy solutions more accessible and sustainable.

Construction: Sustainable building practices are on the rise, and our eco-friendly adhesives are instrumental in achieving these goals. They provide strong bonding capabilities for green building materials while reducing the environmental impact of construction projects.

Conclusion

As we navigate the path towards a more sustainable future, adhesive solutions are emerging as a driving force for positive change. Our eco-friendly adhesive products are not just about bonding; they represent a commitment to environmental responsibility and a greener tomorrow.

If you are interested in our products, please feel free to contact us.

/0 Comments

Customizable and Versatile: The Power of Our Adhesive Products in Diverse Industries

In today’s business landscape, adhesive products have become indispensable industrial materials. Manufacturers and businesses across various industries require high-quality adhesives to meet various bonding needs.

As a B2B manufacturer specializing in adhesive products, we take pride in our extensive range of adhesive products known for exceptional customizability and versatile applications, making us a popular choice in diverse markets.

Exceptional Customizability

As adhesive suppliers, we understand that different industries and customers have distinct bonding requirements. Therefore, our adhesive product range emphasizes customizability to meet specific demands. Whether it’s high-strength adhesives for automotive assembly or micro-adhesives for electronic device assembly, we can provide tailored solutions to meet your needs.

Our research and development team boasts extensive experience and expertise, allowing us to customize adhesive products based on precise customer requirements. Whether it’s adjusting bond strength, adhesion properties, or weather resistance, we can fine-tune our products to align with your unique specifications. This high degree of customizability ensures that our adhesive products can cater to the demands of various industries and applications, providing customers with optimal solutions.

adhesive products

Versatile Application Across Industries

Our adhesive products find wide-ranging applications across various industries, including but not limited to automotive manufacturing, electronics, medical, construction, and packaging.

In the automotive manufacturing industry, our adhesive products are extensively used in body assembly, interior assembly, and sealing. They not only exhibit excellent bonding performance but also feature high-temperature resistance, weather resistance, and resistance to chemical corrosion, ensuring stable performance under various challenging conditions.

In the electronics sector, our adhesive products are employed in circuit board assembly, encapsulation, and heat dissipation. They offer outstanding electrical insulation properties and maintain stability even in high-temperature environments, ensuring the reliability and durability of electronic devices.

In the medical field, our adhesive products are widely used in medical device assembly and encapsulation. With excellent biocompatibility, they are safe for use in medical equipment manufacturing and also possess antimicrobial properties, contributing to the hygiene and safety of medical devices.

In the construction industry, our adhesive products are utilized for various structural bonding, sealing, and insulation applications. They exhibit excellent weather resistance and durability, ensuring the longevity and safety of building structures.

In the packaging sector, our adhesive products are employed for sealing and securing various packaging materials. They offer superior adhesion and sealing properties, ensuring the integrity and freshness of packaged goods.

Conclusion

As a B2B manufacturer specializing in adhesive products, our offerings feature exceptional customizability and versatile applications. Whether you work in automotive manufacturing, electronics, medical, construction, or packaging, we can provide adhesive product solutions tailored to your needs. Our products not only deliver outstanding bonding performance but also offer high-temperature resistance, weather resistance, and resistance to chemical corrosion, ensuring exceptional performance in diverse application conditions.

If you are in search of a reliable adhesive supplier, consider choosing us. Our team is dedicated to providing customized solutions to meet your bonding requirements. We believe that with our exceptional products and services, your projects will achieve greater success. Regardless of the scale of your project, we are willing to be your partner in growth and development.

/0 Comments

Heat-resistant water-based pressure pressure-sensitive adhesive

Heat-resistant water-based pressure-sensitive adhesive is a water-based pressure-sensitive adhesive with high temperature and water resistance, which is commonly used in applications where adhesion properties need to be maintained under high temperature and wet conditions. This adhesive is usually composed of a water-based matrix, tackifier, stabilizer, heat-resistant additive, etc., to achieve adhesion and stability under specific conditions.

The following are some features and applications of heat-resistant water-based pressure pressure-sensitive adhesives:

Features:

  • Heat resistance: Heat-resistant water-based pressure-sensitive adhesive maintains adhesion properties at high temperatures, which makes it suitable for applications under high operating conditions.
  • Water resistance: This adhesive can maintain adhesion properties in wet environments and is not easily affected by water.
  • Adjustability: The composition of heat-resistant water-based pressure-sensitive adhesives can be adjusted to achieve specific adhesion properties and characteristics.

Application field:

  • Automotive: In automotive manufacturing, heat-resistant water-based pressure-sensitive adhesives can be used to bond interior, exterior, etc., to maintain stability even under high temperatures and wet conditions.
  • Industrial sector: In industrial applications, this adhesive can be used to bond metals, plastics, and other materials, maintaining adhesion even in high-temperature and humid environments.
  • Electronic product manufacturing: In the manufacture of electronic products, heat-resistant water-based pressure-sensitive adhesives can be used to fix and connect electronic components to meet the requirements of high temperature and humid conditions.
  • Labeling and packaging: This adhesive can also be used in labeling and packaging materials to ensure adhesion properties in a variety of environments.

It should be noted that different application areas may have different performance requirements for heat-resistant water-based pressure-sensitive adhesives, so when selecting and using, it is necessary to evaluate and test according to the specific application needs to ensure that the selected adhesive can achieve the desired effect.

If you are interested in our products, please feel free to contact us.

/0 Comments

Adhesives required for the lithium battery market

In the manufacturing process of lithium batteries, adhesives play an important role in fixing and connecting different components to provide structural support and protection for the battery.

Here are some of the adhesives that the lithium battery market may need and their applications:

  1. Conductive adhesive: used for the connection of battery connecting pieces, battery pole pieces, battery housing, and other components to ensure the conduction of current.
  2. Insulating adhesive: used for insulating isolation between battery components to prevent short circuits and electrical interference between battery components.
  3. Heat guide adhesive: used between the battery component and the heat sink to promote the heat conduction and heat dissipation of the battery and improve the stability and life of the battery.
  4. Sealant: Used in the battery assembly process to ensure the tightness of the battery shell and prevent liquid leakage inside the battery.
  5. Structural support adhesive: used to fix the position of the battery component to enhance the mechanical strength and stability of the battery.
  6. Bonding adhesive: used for bonding between battery components, such as battery cover plate, battery pole plate, etc.
  7. Penetration adhesive: used for tight connection of battery components to improve battery performance and life.
  8. High-temperature adhesive: used to maintain the performance of the adhesive in a high-temperature environment to meet the requirements of the battery under high-temperature working conditions.
  9. Low-temperature adhesive: used to maintain the performance of the adhesive in a low-temperature environment to meet the requirements of the battery under low-temperature working conditions.
  10. Chemical-resistant adhesive: used to protect the battery components from the erosion of chemical substances inside the battery.

aluminum plastic film

The types and applications of lithium batteries are wide, so the demand for adhesives also varies by application. When choosing an adhesive, it is necessary to choose according to the type of battery, working environment, and performance requirements. At the same time, because lithium batteries have certain safety risks, it is also very important to ensure that the selected adhesive meets the relevant safety standards.

If you are interested in our products, please feel free to contact us.

/0 Comments

Emulsion acrylate pressure-sensitive adhesives

Emulsion acrylate pressure-sensitive adhesives are indeed very common on the market. Emulsion pressure-sensitive adhesive is a water-dispersed adhesive, which is composed of an acrylate monomer, emulsifier, stabilizer, and so on. This adhesive is usually in the form of an emulsion (water-dispersed liquid), which can form an adhesive layer by evaporation and drying of water after coating.

Emulsion acrylate pressure-sensitive adhesive has some advantages in its application:

  1. Environmental protection: Because the matrix of emulsion adhesives is water, compared with traditional organic solvent-based adhesives, they release less organic solvents during preparation and use, and have less impact on the environment.
  2. Safety: Emulsion adhesives do not contain volatile organic compounds, so they are relatively safe to operate and use.
  3. Adaptability: Emulsion adhesives can be used on a variety of substrates, including paper, plastic, cloth, etc.
  4. Low odor: Compared with organic solvent-based adhesives, emulsion adhesives usually have a lower odor.
  5. Adjustability: The composition of emulsion adhesives can be adjusted according to needs to obtain specific adhesion properties and characteristics.
  6. Wide application: Emulsion adhesive is suitable for a variety of applications, including paper products, packaging, labels, medical supplies, etc.

glass protection films

However, emulsion adhesives also have some limitations, such as a longer curing time, and may be affected in humid environments. When selecting emulsion adhesives, it is necessary to consider the needs of the specific application and the performance characteristics of the adhesive to ensure that the selected adhesive can achieve the desired effect.

If you are interested in our products, please feel free to contact us.

/0 Comments