How to deal with long and aging difficult to tear the protective films?

As we all know, the role of the protective film is used to protect the appearance of the product from being scratched and dirty, and the protective film due to sticking on the above for a long time will appear a very embarrassing problem, is not torn off, or tear when there is adhesive on the above, especially the steel door, aluminum plate, aluminum alloy, stainless steel, and other products, the protective film itself is a low viscosity, So over time, the protective film will bond to the item.

So protective film aging difficult to tear how to do? Protective film time long how to tear?

1. Hair dryer blowing with a hair dryer against the aging protective film, while blowing hot air, tear, better tear, do not wait for cool and then tear.
2. Deplasticizer Go to the hardware place to buy a bottle of deplasticizer, spray on the aging protective film, and then tear it.
3. Gasoline wipes off the aging protective film with gasoline and then wipes it clean with Jie Jie Ling.
4. Wipe oil brush machine oil brush on the aging protective film, turn day, oil has penetrated into the protective film and then tear good tear…
5.  Alcohol wipes with a cloth dipped in alcohol a little wipe, wipe again with water, wipe clean.
   

   If necessary, you can use: Nail polish remover or Banana water

Nail polish remover, usually not every family will have, so it may not be very convenient. If you have nail polish remover, the use of alcohol is the same, the effect is also very good. And there is no requirement on the quality of nail polish remover, either good or average, as long as it can remove nail polish.

Banana water

Banana water, which many of you have heard of, is an industrial dosage used in paint, which can be easily bought in paint stores, and used in the same way as alcohol.